ISO-THERM Thin Internal Wall Insulation Roll 0.95m x 7.5m (TIWI Membrane)

Iso Therm Internal Wall Insulation 7.125 m2 ISO-THERM Damp Proofing Thermal Insulation an ultra thin ( /-4mm) specially woven polyester based material, which is both unique and patented. Available in rolls of 0.95 metre wide, it is flexible and lightweight andwill accommodate a multitude of wall finishes.Due to its ease of use and flexibility it can be cut around light switches/sockets/radiator brackets and the like, and is minimally invasive in its installation. Very often , door architraves and skirting’s can remain in place, and because of its malleability it fits around and into window reveals with ease.or order ourISO-THERM Thin Internal Wall Insulation Kit 7.125m² – Damp & Thermal System Iso Therm Internal Wall Insulation 7.125 m2 It is fixed in place with our unique ISO-THERM adhesive, normally trowelled onto the wall to a thickness of circa 5mm, and with the ISO-THERM affixed and rolled into the adhesive, the overall finished depth after a direct plaster skim coat is approximately 10mm.ISO-THERM is vapour permeable, but waterproof, thereby resisting any lateral damp transference, and stopping the subsequent natural surface nitrates and chlorides forming as an efflorescent salt. Because of its high thermal benefit, and the withholding of any natural damp transference it is highly resistant to any formation of surface mould.The sheer speed of application, and the ability to apply direct to sound plastered walls, means that large areas can be applied in a very short space of time, and save for the plaster skim coat and painting, both residential and commercial properties suffering from cold and damp/mouldy walls can be improved substantially with the minimum of disruption. Data Sheet & Case Study ISO-THERM Internal Wall Insulation – FAQs What Is ISO-THERM? ISO-THERM is an ultra-thin (±4mm) patented polyester-based thermal insulation and damp-proofing material. It is designed to improve thermal performance, reduce condensation, and prevent mould growth on internal walls without significantly reducing room space.Key BenefitsUltra-thin insulation with high thermal performanceHelps prevent condensation, damp, and surface mouldVapour permeable yet waterproofMinimal loss of internal spaceSuitable for residential and commercial useFast application with minimal disruption Where Can ISO-THERM Be Used? ISO-THERM is suitable for internal walls affected by cold spots, condensation, damp, or mould. It can be applied directly to sound plastered walls and is ideal for homes, flats, offices, and commercial buildings.Ease of InstallationISO-THERM is lightweight, flexible, and easy to work with. It can be cut neatly around:Light switches and socketsRadiator bracketsWindow revealsDoor architraves and skirting boards (often left in place)Its flexibility allows it to fit awkward areas with ease, making installation minimally invasive. How Is ISO-THERM Installed? The system is fixed using the dedicated ISO-THERM adhesive, typically trowelled onto the wall at around 5mm thickness. The ISO-THERM – Thin Internal Wall Insulation is then pressed and rolled into the adhesive. Once installed, the surface can be finished with a direct plaster skim coat.The overall finished wall depth after plastering is approximately 10mm. Damp & Mould Resistance ISO-THERM ISO-THERM is vapour permeable but waterproof. This means it allows the wall to breathe while resisting lateral damp transfer. It prevents the formation of surface salts such as nitrates and chlorides and significantly reduces the risk of mould growth. Thermal Performance of ISO-THERM Thanks to its high thermal efficiency, ISO-THERM helps raise internal wall temperatures, reducing cold surfaces where condensation typically forms. This improves comfort levels and energy efficiency within the property. ISO-THERM Speed & Disruption Large wall areas can be treated in a short space of time. Apart from plastering and painting, disruption is kept to an absolute minimum, making it ideal for occupied properties. About ISO-THERM Adhesive ISO-THERM Adhesive is a ready-to-use mineral adhesive composed of stabilised potassium silicate, siliceous aggregates, quartz sand, and specialist additives. It is vapour permeable, water repellent, and designed specifically for use with the ISO-THERM system. Data Sheet & Case Study Shop with confidence. Shop with us.PAM Ties & Builders Superstore have been providing goods to the building trade since 1991, and as you can imagine over that time we’ve built up quite the reputation for great value and the highest levels of customer satisfaction.Our websites are secure and easy to use, with tens of thousands of products available from the best names in the industry.Does that mean we never get it wrong? Of course not, but in those tiny number of cases, you’ll find we pull all of the stops out to put things right for you. We Provide:Low PriceFast, Free Delivery Over £75.00Over 30,000 products OnlineAll The Top Work BrandsMoney Back GuaranteeSecure Shopping GuaranteedProviding Quality & Value Since 1991Family Ran Business