DescriptionFEATURES AND BENEFITS of Ceresit CT16 Quarc Primer 10LDispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters.PROPERTIESImproves the adhesion between ETICS system layersLow absorbency and vapour permeabilityEasier application of plastersPerfect final effect of the finishing layerReady to use, can be applied with roller or brushHigh opacityDESCRIPTIONCERESIT® CT 16 facilitates the application of thin-layer plasters and renderings inside and outside the buildings. It is recommended for priming the reinforced layers within CERESIT Ceretherm ETICS and traditional plasters. CT 16 can be applied to the surfaces of chipboards, gypsum cardboards, gypsum plasters, all types of concrete and strong paint coats. Available pack size: 10 lCeresit CT16 Quarc Primer 10L SUBSTRATE PREPARATIONThe substrates to be coated with the paint CERESIT CT 16 should be smooth, even, dry and free from any substances that decrease adhesion: grease, bitumen, dust, etc. The absorptive substrates, e.g. gypsum plasters, chipboards, non-impregnated gypsum cardboards should be primed with the agent CERESIT.APPLICATIONThe content of the packing should be stirred. Neither rusty containers nor tools should be used. Do not dilute the paint! There is recommended to apply one even layer CERESIT CT 16 using roller or brush. Drying time is approx. 3 hours. Tools and fresh stains should be washed with water.CERESIT CT 16 PRIMER – ADHERENCE AND WEATHER CONDITIONSThe priming paint should be applied in the ambient temperature and that of the substrate from 5 °C to 25 °C and the humidity below 80 %. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted.Browse all Primers & Undercoats.
